THREEBOND 1360F
Update: 2011/3/17 View:
- Brand: $article_date$
- Type: TB1360F
Introduction
Spot long-term supply of Japan's ThreeBond TB1360F anaerobic sealant THREEBOND 1360F anaerobic sealant with chimeric
TB1360F
TB 1360F
THREEBOND 1360F
THREEBOND1360F
Three key 1360F
Three key 1360F anaerobic sealant
ThreeBond 1360F is a high strength and excellent heat resistance, anaerobic sealant. Not exposed to air during the hardening, and isolate the air after contact with the metal reacts rapidly (polymerization hardening), bonding and sealing screws and chimeric site. (Hereinafter referred to as the ThreeBond TB)
• High strength type.
• High heat levels.
* Required screws are heat-resistant parts of the bonding, the chimeric binding sites
Use
1) Please wipe with a solvent coating parts such as water, oil, dirt and so on.
2) Make appropriate coating and assembly.
3) on the other resin coating and curing methods, please contact our sales and technical personnel.
Caution
1) Because it is a hazardous material, so please do not direct contact or inhalation of the vapor, such as accidentally attached to the skin may cause inflammation, then immediately with a cloth, paper to wipe and wash with soap and water. If it gets, wash immediately with water for about 15 minutes, and then look for a medical examination.
2) use, such as body feeling abnormal, stop operation immediately and examined by a doctor. In addition, allergies or skin sensitive people should not be to the FDA.
3) it contains harmful ingredients, so please do not use tap water supply pipe or hot water supply pipe. Please carefully examine the use and purpose before the FDA.
4) Do not place this product into other containers or residue after use and then fell back to the container.
5) This product is part of the material objects may cause adverse effects (cracks, corrosion, dissolution, etc.). Make sure to use the goods on the site and its surrounding areas will be the impact, if any problems do not use.
6) The product has a curing effect, so disabled at the nozzle metal products, etc..
7) To prevent the deterioration or foreign matter, please cover after use and keep.
8) were cured by heating the product at room temperature without mobility. According to the temperature in some cases, the need to maintain their mobility, so make sure to use parts of the prior case before the FDA.
9) If you need more detailed content and information, please refer to the product safety data sheet (MSDS).
Storage method
1) in the dark, -5 ~ 25 ℃ under the conditions of preservation of the goods.
2) in the infants, children, hand of the reach of the use and storage.
Disposal methods
1) because of possible harmful gases, so do not burn.
2) The abandonment of the goods, ask a professional knowledge of the waste disposal unit for processing.
Legal restrictions
Fire Law: The fourth category is strictly prohibited the use of fire oil acrylic adhesive third risk level III
Note
(Do not use in the family)
Before using this product, please read and agree to the following conditions of sale before use.
1) The technical information included in the data, are based on test methods under the Company obtained experimental values, it is difficult to absolutely guarantee its accuracy and completeness. Users in the use of this product be sure to determine their own use, the purpose is appropriate, and take place with all the responsibilities and risks. Range of quality assurance, quality problems clearly only replace the product.
2) is not responsible for misuse of this product may cause injury or losses.
3) For matters not covered in this book, the company recorded in the book only bear the responsibility of the contract.
More Products
